2pcs IWP181 2770607A Flow Matched Fuel Injector for Harley-Davidson Sportster XL 883C 1200C Roadster XL 1200CX Superlow XL Custom XL Nightster XL

Description: Condition: Brand New Start up in cold environments, lower flow fluctuations for fuel. Made of durable material to ensure long service life. Direct replacements of your old injectors and no modification needed. This is a non-OEM product, accessory only! Specification: O-Rings Included: Yes, preinstalled Orifice Type: 4 holes disc Material: Metal, Plastic Color: Silver Tone, Gray Voltage: DC 12V OE Number: IWP181, 2770607A Pin Number: 2 Dimension: 4.7x3.2x2cm / 1.85"x1.26"x0.79"(L*W*H) Note: Please check the fitment section of this listing before you order. Please kindly check again your engine volume! This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools! Fitment: for Harley-Davidson Sportster (EFI) - XL 883 2007-2008 for Harley-Davidson Sportster (EFI) - XL 883R 2007 for Harley-Davidson Sportster Custom - XL 1200C 2009-2017 for Harley-Davidson Sportster Custom - XL 883C 2009 for Harley-Davidson Sportster Custom (EFI) - XL 883C 2007-2008 for Harley-Davidson Sportster Forty-Eight - XL 1200X 2010-2017 for Harley-Davidson Sportster Iron - XL 883N 2009-2016 for Harley-Davidson Sportster Low - XL 1200L 2009-2011 for Harley-Davidson Sportster Low - XL 883L 2009-2010 for Harley-Davidson Sportster Low (EFI) - XL 1200L 2007-2008 for Harley-Davidson Sportster Low (EFI) - XL 883L 2007-2008 for Harley-Davidson Sportster Nightster - XL 1200N 2009-2012 for Harley-Davidson Sportster Nightster (EFI) - XL 1200N 2007-2008 for Harley-Davidson Sportster Roadster - XL 1200CX 2016-2017 for Harley-Davidson Sportster Roadster (EFI) - XL 1200R 2007-2008 for Harley-Davidson Sportster Seventy Two - XL 1200V 2012-2016 for Harley-Davidson Sportster Superlow - XL 1200T 2014-2017 for Harley-Davidson Sportster Superlow - XL 883L 2011-2017 Package Included: 2 x Fuel Injector Installation: Step 1. Make sure the engine is cool down. Disconnect the battery. Step 2. Remove the bolts and brackets from the fuel rail. Step 3. Disconnect the plug on each injector. Step 4. Lift the fuel rail and remove the injector from the fuel rail. Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes. Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery. Step 7. Double check for fuel leaks before and after starting the engine.