RockJock's Johnny Joint adjustable front trac bar for the TJ/XJ/LJ/MJ features an offset Johnny Joint rod end that puts the bar further forward providing more clearance between the diff and the trac bar.
Other features include 1 1/4 Inch x .250 wall 4130 chrome moly construction, a welded in gusset from the bar to the Johnny Joint, heavy duty adjustor end with with bushing and steel insert sleeve that bolt into the factory housing bracket, and semi-gloss black powder coat finish.
Some drilling is required for installation. The supplied frame bolt is a 5/8 Inch and this hole must be drilled to size to accommodate the heavier duty bolt.
Note: This trac bar is intended to be used with a minimum of 2 Inch of lift. It may work on vehicles with less lift with Dana 30 frontends, however, on vehicles with no lift and a Dana 44, 9 Inch or 60 frontend, you may run into a clearance issue. Always check fitment before drilling!
Details:
- Johnny Joint Trac Bar
- 97-06 Wrangler TJ and LJ Unlimited/XJ/MJ Front
- Bolt-On
- Adjustable
- Greasable
- Chromoly
- Drilling Required
- Reuses Stock Housing Bolt