Zeus-Link Gauge Interface Module SN73Z-S1

Zeus-Link Gauge Interface ModuleFeatures:System queries vehicle upon installation to determine what list of parameters can be obtained from the vehicle and used as inputs to gaugesSpaces for 6 standard gauges: speedo, tach, fuel, oil, volt, temp, and 2 auxiliary gauges of the customers? choosingAll instruments can be driven traditionally through proper senders if vehicle ECU does not support an output the driver wants to monitorSet up and managed all through an app available on the App Store? or Google Play?The app is used to configure by choosing which gauges a customer has in the dash and how each gauge gets its signalThe app has a virtual gauge screen, aligning with the dash instrumentsThe app has easy diagnostics, displays values being received by Zeus-Link and will allow user to cycle gauges to predetermined positions, to verify correct outputs and wiringWarning and check engine light outputs on the Zeus-Link and external contacts to light a dash lightDash light connectionAll gauge connections to Zeus-Link (power, ground, signal, dash lights)Additional resistor dongle available if needed to use multiple Holley CAN devices on the same harnessHarness plugs direct into Zeus-Link and then to Holley ECU or OBDHolley harness has additional Holley ECU connector for other devicesOn-board diagnostic lights give status of power, BLE, and data on the circuit board for Zeus-LinkPass-through CAN port connection for other CAN devicesCompatible with all Classic Instruments sending units and gaugesSpecs:BrandClassic InstrumentsEmission Code6Product TypeAdapter